Online Dental CE

• “The light intensity gave me more confidence that materials were completely cured.”
• “Lightweight, easy to manipulate in the mouth.”
• “The buttons were easy to access.”
• “Small size makes it easy to see what you are doing.”
• “Round unit can roll off the counter.”
• “Offer a black light guide.”
• “Offer a simplified instruction card.”

S.P.E.C. 3 LED is a pen-style, cordless LED curing light with wavelength output of 430 to 490 nm. Its lightweight construction is designed to reduce hand fatigue, and the sealed aluminum body helps ensure effective disinfection. S.P.E.C. 3 LED features multiple curing modes (Standard, 3K and Ortho) for rapid and deep polymerization of all light-cured dental materials. Standard Mode offers high intensity and cures composite in 2 mm increments in 5 seconds. 3K Mode offers rapid curing of 2 mm increments in 1 second. Ortho Mode is designed for curing an entire arch of brackets with two, 3-second intervals per bracket. Maximum output is 1,600 mW/cm² in the Standard Mode and 3,000 mW/cm² in the 3K/Ortho Modes with the 8 mm turbo tip light guide. The lithium polymer battery provides enough storage capacity to perform over 300 10-second cures between charges. The unit comes with an 8 mm light guide, 100 barrier sheaths, two light shields, curing test block, and charger base with power supply. S.P.E.C. 3 LED was evaluated by 13 consultants in over 900 uses. This LED curing light received a 91% clinical rating. Equipment Features
Read Full Evaluation »