• “I had good results once the rings were placed.”
• “Excellent margin adaptation - little flash so little interproximal finishing required!”
• “Wedge Wands had good contours and the selection was excellent.”
• “The soft face tips adapt very well to the interproximal area forming a very tight contact and natural contour.”
• “There is a slight learning curve with this product, but well worth the effort.”
• “Challenging to place rings, especially when restoring a molar/premolar contact with interproximal width discrepancies.”
• “The matrix bends and flexes too easily.”

Composi-Tight 3D Sectional Matrix System is designed to create tight, anatomical contacts on Class II composite restorations. The system is made up of three components: bands, rings and wedges. Slick Bands are single-use disposable, contoured sectional matrix bands with a non-stick surface. Two ring types are included in the system: Soft Face 3D-Ring, with a padded surface that adapts to the contours of the tooth and larger tips for use with wider embrasures; and G-Ring, which has thin tines with burnished ends. Wedge Wands are contoured plastic wedges with attached handles for easy placement, adjustment and removal. Wedges are available in four color-coded sizes. The Soft Face 3D-Ring is recommended as the primary ring, with the G-Ring being utilized in cases of stacking the rings for treatment of multiple surfaces or when increased ring retention is required. Both types of rings are angled at 12.5° to allow stacking of the rings. Steam autoclaving is recommended to maintain the strength and appearance of the rings. The system as packaged contains three Soft Face 3D-Rings (orange tip), two G-Rings (gray), 170 Assorted Slick Bands. 400 assorted Wedge Wands, one pair of placement forceps, and instructions. Composi-Tight 3D Sectional Matrix System was evaluated by 32 consultants in 1031 uses. The product received a 92% clinical rating.   Product Features
Read Full Evaluation »